Porcelain and Ceramic tiled floors look great when just washed

How do I keep that clean shiny look for my tile floor?

Apply LTP Glaze ProtectorOne thing we are told time and time again is that our customers really like the appearance of their floor tiles when they have just been mopped. The question is “Is there anything I can use on my tile floor to make them stay like that?”

The answer is yes…

LTP has a product called LTP Glaze Protector.


Achieving and retaining that perfect looking tile floor is often the goal of our customers. LTP Glaze Protector provides a genuine solution for ceramic, porcelain and vitrified quarry surfaces. Simply follow this 3 step guide to a new looking shine floor.

Restore – Revive – Retain

1. Restore

Bring old tired floors back to life by giving them a really thorough clean with LTP Grimex. This will get the oldest dirtiest floors back to their original condition.

LTP Grimex

Cleaning Porcelain withLTP GrimexHeavy duty grime remover for interior and exterior use. Effective for removing oil, grease, ingrained dirt grime and old wax layers. Important: Test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised. This can be done with a little clean water applied by sponge.

Key facts:

  • Heavy Duty Grime Remover.
  • Removes oil, grease and dirt.
  • Removes old wax layers.
  • Suitable for interior use.

Buy LTP Grimex >>>

2. Revive

LTP Glaze Protector

LTP Glaze Protector gives a just washed lookCreate the ‘just washed’ look to your newly cleaned surfaces by applying LTP Glaze protector. This robust film forming sealer will enhance the appearance of even the dullest floor. It is easy to apply, quick drying and eases maintenance on rougher more textured surfaces. LTP Glaze Protector is quite unique and will give a clean and shiny sheen to ceramic tile floors or porcelain. It is a low maintenance, self shine, film forming sealer for all types of tiled floor including glazed or unglazed ceramic, porcelain, unpolished porcelain and vitrified quarry tile. Once applied this product will help protect and embellish the surface. LTP Glaze Protector delivers a high resistance to wear and helps prevent staining of your tile floor. Using this product will also help with ongoing maintenance and cleaning of your ceramic or porcelain tile floor.  

Key facts:

  • Low maintenance self shine sealer.
  • Highly resistant to wear and stains. 
  • For interior use only.

Buy LTP Glaze Protector >>>

3. Retain

A tile floor treated with LTP Glaze Protector should be maintained with LTP Floorshine to help reinforce protection and make sure your floor remains clean and looking great. 

LTP Floorshine

Buffing PorcelainLTP Floorshine is a highly effective maintenance cleaner for tiled surfaces and is ideal for all types of porcelain, ceramic and vitrified quarry tiles.Maintain the ‘just washed’ look with regular us of LTP Floorshine. In place of your normal detergent, simply put one cap full of Floorshine per litre of water and mop your surfaces. This product will clean your surfaces and repair the seal every time you use it. A one litre container is enough solution to wash a 20 square metre floor 40 times so it is very economical.

Key facts:

  • Cleaner for tiled surfaces.
  • Will help reinforce protection for surface sealers.
  • For interior use only. 

Buy LTP Floorshine >>>

At LTP we believe in helping to provide solutions and this is why we offer a no obligation LTP TECHNICAL HELPLINE, so please give us a call on +44 (0) 1823 666213 and we will be happy to help you. Visit www.ltp-online.co.uk to buy from the LTP Range of products or find out more about us.

7 thoughts on “Porcelain and Ceramic tiled floors look great when just washed

  1. Pingback: Are you just about to buy Wall or Floor Tiles ? Confused about the different types of Glazed Ceramic Tiles and Glazed Porcelain? | Wellington Tile Warehouse

  2. We need to repair the shine back onto our porcelain tiles as some sticky tape was pulled up from a couple and they have lost their shine. Would your product repair this?

    • Hi,
      To remove the sticky residue from the surface we would recommend using LTP Solvex http://www.ltp-online.co.uk/prod/ltp-solvex
      Before recommending what product to use after, is it possible if you could send a photo of your tiles?
      If you send through to info@ltp-online.co.uk
      I could also then asses the amount of residue from the tape.
      Do you know what type of porcelain tiles you have? I.E Full bodied, Glazed or Polished?

      Kind Regards

    • Hi,
      Thank you for contacting us.
      Has the matt porcelain been sealed at all?
      What have you tried to wash it with?
      If you have any further information to this and images, can you email them to technical@ltp-online.co.uk
      We will respond as soon as possible.
      Kind Regards

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s